5.Turn the computer upside down on a flat surface, with the battery bay toward you.

6.Remove the battery.

NOTE: For more information, refer to the section “Inserting or removing the battery,” earlier in this guide.

7.Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.

8.Replace the battery.

NOTE: If the battery is not replaced, HP Mobile Broadband is disabled.

9.Turn the computer right-side up, and then reconnect external power and external devices.

10.Turn on the computer.

Removing a SIM

To remove a SIM:

1.Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch. Then shut down the computer through the operating system.

2.Close the display.

3.Disconnect all external devices connected to the computer.

4.Unplug the power cord from the AC outlet.

5.Turn the computer upside down on a flat surface, with the battery bay toward you.

6.Remove the battery.

Using HP Mobile Broadband (select models only) 35