3.Slide the hinge bracket on the monitor into the opening on top of the pedestal. The panel will click into place when fully inserted.

Figure 3-2Inserting the Monitor Panel

Connecting Monitor Cables

CAUTION: Before connecting cables to the monitor, ensure that the computer and monitor are powered off.

NOTE: When using a DVI, VGA, or HDMI signal, you must connect your audio output to external speakers.

The video source is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the source button on the front panel.

Connecting the HDMI Cable

Connect one end of the HDMI cable to the back of the monitor and the other end connector to the input device. The HDMI cable is included with the monitor.

NOTE: The audio stream must be connected directly to external speakers or to an audio receiver.

ENWW

Connecting Monitor Cables 7