HP 2311gt Diagonal 3D manual Dvi

Icon	Main Menu Options	Sub-menu Options	Description
		Sleep Timer	Provides the timer-adjustment menu
			options:
			● Set Current Time — Sets the
			current time in hours and minutes.
			● Set Sleep Time — Sets the time
			you want to place the monitor in
			sleep mode.
			● Set On Time — Sets the time you
			want the monitor to wake up from
			sleep mode.
			● Timer — Sets the Sleep Timer
			feature on or off; the default setting
			is Off.
			● Sleep Now — Immediately sets the
			monitor to enter sleep mode.
	Language		Selects the language in which the OSD
			menu is displayed. The factory default is
			English.
	Information		Selects and displays important
			information about the monitor.
		Current Settings	Provides the current input video mode.
		Recommended Settings	Provides the recommended resolution
			mode and refresh rate for the monitor.
		Serial Number	Reports the serial number of the
			monitor. The serial number is needed if
			contacting HP technical support.
		FW Version	Reports the firmware version of the
			monitor.
		Backlight Hours	Reports the total hours of backlight
			operation.
		Service Support	For service support, go to: www.hp.com/
			support.
	Factory Reset		Returns settings to factory defaults.
	Source Control		Selects the video input signal. The
			factory default by priority is DVI, VGA,
			and then HDMI.
		DVI	Selects DVI as the video input signal.
		HDMI	Selects HDMI as the video input signal.
		VGA	Selects VGA as the video input signal.
		Default Source	Selects the default or primary video
			input signal when the monitor is
			connected to two active and valid video
			sources. The monitor will automatically
			determine the video format.

ENWW Using the On-Screen Display (OSD) 21