To run the “Align Printheads” utility through the Control Panel:

1.Press [Menu] until DIAGNOSTICS MENU appears.

2.Press [Item] until ALIGN PRNT-HDS appears.

3.Press [Select].

4.The printer will print a page with 5 sets of alignment patterns.

5.In each set (A, B, C, D or E) select the most aligned (straightest) pair of lines (1, 2, 3, 4 or 5).

6.Enter the corresponding numbers in the Control Panel by pressing [Value].

7.When you have entered a value for a set, press [Item] to move to the next.

8.When you have finished entering the values press [Select].

9.The printer will print a confirmation page consisting of 2 squares and a cross.

10.Check the confirmation page to see if the lines on the squares and the cross are aligned.

11.Re-align the printheads if the confirmation page is not satisfactory.

HP

2500C

Removing Paper Jams

 

 

 

If paper is jammed in the printer, follow these instructions to clear the jam:

1. Remove all media from trays 1, 2 and 3. Pull out any paper that is visibly stuck.