HP 2500C manual Type Size, Press to, Continue, Remove, Unexpected, Paper Size, Aligned

MNL FEED LOAD	You have chosen to print	Load the paper type and
[TYPE] [SIZE]	through the Rear Manual	size as specified in the LCD
	Feed.	panel and press	to
		continue printing.
TRAY [NUMBER]	The specified tray is empty.	Load the paper size and
EMPTY, LOAD &	Load the paper size and type	type which this tray
PRESS	which this tray has been set	has been set up for.
	up for.	If you wish to change the
		paper size setting of this
		tray, please refer to
		section on Loading Paper.
PRESS TO	To continue your present
CONTINUE	task, press the button.
MEDIA IN TRAY 1,	There is media in Tray 1 which	Remove the media in Tray 1
REMOVE	may not be the type or size	and press the	button
	that is specified in your	to resume printing.
	current print job.	If you wish to print
		through Tray 1, set your
		driver to pick from Tray 1
		and send the print job
		before putting media in
		Tray 1.
WRONG MEDIA	The media type which the	You may wish to either
TYPE, [ACTION]	printer has detected is not	load in the right media, or
	the type specified in your	choose to print on existing
	print settings.	media. You may also cancel
		the current print job by
		pressing the [Cancel Print]
		button.
UNEXPECTED	The specified paper size	Reload the correct media
PAPER SIZE	is different from the	into the tray and print again.
	paper size in the selected
	input tray. The output was
	truncated to fit the paper
	in the printer. Some output
	may have been lost.
PRINT-HDS NOT	The printheads have not	Align the printheads.
ALIGNED	been aligned. For best	See below for instructions
	print quality, align the	on how to align printheads.
	printheads before the
	next print job.