(continued)
Behavior | Cause and solution |
Power light, ink levels, and attention light are blinking. | Ink access door is open. |
| See Prepare the trays. |
Both ink level icons are blinking. | Both cartridges are missing, or do not have the |
| tape removed, or may be defective. |
| Install cartridges, or remove the pink tape from |
| the cartridges, or replace the defective cartridges. |
| See Replace the cartridges for more information. |
|
|
One ink level icon is blinking. | Blinking icon indicates corresponding cartridge is |
| missing, or does not have the tape removed, or |
| may be defective. The printer will print in single- |
| cartridge mode with one cartridge. |
| Install missing black or color cartridge, or remove |
| the pink tape from the cartridge, or replace the |
| defective cartridge. |
|
|
Letter "P", media icon, and attention light are blinking. | There is no paper, or paper is not feeding. |
| Load paper, then press any button, except |
| Cancel, to resume printing. See Load media. |
Letter "J", media icon, and attention light are blinking. | There is a paper jam. |
| See Clear a paper jam. Load paper, then press |
| any button, except Cancel, to resume printing. |
Letter "C", ink level icons, and attention light are blinking. | Cartridge carriage inside printer has stalled. |
| Open cartridge door and make sure carriage is |
| not obstructed. Move carriage to the right, close |
| door, and then press any button, except Cancel, |
| to resume. |
|
|
Power light, media icon, and attention light are blinking. | Scanner is not working. Press Power button to |
| turn printer off, and then on again. |
| If problem persists, contact HP. Printer will still |
| print even if scanner is not working. |
Status lights | 7 |
