INSTALLATION
This control should only be installed by a qualified person familiar with its operation and associated hazards. The National Electrical Code (NEC), local electrical and safety codes, and when applicable, the Occupational Safety and Health Act (OSHA) should be observed to reduce hazards to personnel and property.
Step 1. Examine before installation
Check that the model number on the control matches the model number ordered. The control model number is printed as part of the serial number on an adhesive label on the outside bottom surface of the control enclosure. Carefully examine the control for shipping damage. Parts errors should be reported to Bodine. Shipping damage claims should be made to the freight carrier.
Figure 2 – The model number is the first four digits of the serial number (S/N) on the control’s nameplate.
CAUTION
Do not connect the control to the power supply if there is any sign of damage. Notify the carrier and your distributor immediately.
6
