Figure 8 - Connection diagram for Bodine 230V
Figure 9 - Connection diagram for Bodine 230/460V
Table 3 - Direction of Bodine motor driveshaft rotation, viewing end of driveshaft, when connected per the diagrams at the left and with control set for “forward” direction
Bodine Motor Type | Direction |
30R2BEPP | CCW |
30R4BEPP | CCW |
CW | |
CW | |
CCW | |
CCW | |
CCW | |
CCW | |
CW | |
CCW | |
CW | |
CCW | |
CW | |
34R6BFPP | CW |
34R6BFYP | CW |
42R6BFPP | CCW |
CW | |
CW | |
CCW | |
CW | |
CCW | |
CCW | |
48R5BFYP | CCW |
A cord should be used for the AC power connection in order to properly seal against water through the liquid tight fitting. Connect the hot side of the line to “L1” and the neutral side to “L2.” Connect earth ground to the terminal labeled “CHASSIS GROUND.” Tighten the barrier terminal block screws to 6
Close the hinged cover and tighten the four screws, one at each corner.
Step 8 - Connect to AC PowerAfter all other connections are made and the control is closed, connect the AC line cord to the AC power supply.
11