12

Verifying that all of the necessary software modules have been successfully installed by AUTOINST and are at the NMMAINT.PUB.SYS utility.

Performing full system backups as neces- sary and ensuring that the HP 3000 system and personnel with the HP 3000 system management knowledge are available when HP is onsite to complete the minimum con- figuration of SNA IMF/iX.

The customer is also responsible for completing the configuration in order to fully integrate SNA IMF/iX into the existing customer network after HP has complete the minimum configuration of SNA IMF/iX.

HP Responsibility

Following the installation of SNA IMF/iX, HP is responsible for the following:

Confirming that all of the necessary soft- ware modules have been installed and are at the correct version level.

Configuring the SNA IMF/iX product to a minimum configuration in order to verify software and hardware functionality.

Verifying the SNA IMF/iX configuration by issuing the RUN TTSSON.PUB.SYS com- mand with the appropriate parameters and entering the IBMTEST command. This test verifies the LU to SSCP session.

These steps complete HP’s portion of the installation and minimum configuration of SNA IMF/iX.

Additional Implementation

Assistance

For implementation needs that go beyond installation, the customer can either provide self-support or can purchase additional services from HP. These services included Network Startup and HP ConsultLine. In addition, the customer can also purchase service from HP on a time-and-materials basis.

Network Startup includes implementation scheduling and coordination assistance, network configuration and verification testing, and network documentation.

System Environment

SNA IMF/iX is available on all HP 3000 Series 900 systems with currently supported releases of the MPE/iX operating system.

SNA IMF/iX requires installation and operation of HP 30291B and A5563A SNA/SDLC Link/iX, J2167B SNA/Token Ring Link/iX, or HP 36939B SNA/X.25 Link/iX.

Support Products

HP offers a spectrum of support service products to help plan, implement, operate, and manage your multivendor network throughout the network lifecycle.

For more information, contact your HP Sales Representative, or refer to the HP data sheets for specific support services.

Documentation

The following documentation is for SNA IMF/iX:

30293-61000 SNA IMF/iX Node Manager’s Guide

30293-61005 SNA IMF Programmer’s Reference Manual

30293-61008 Using SNA IMF Pass Thru

J2220-61025 HP SNA Products remote System Configuration Guide

30293-60211 SNA IMF/iX: User Support Guide (For use in Taiwan)

30293-60221 SNA IMF/iX: User Support Guide (For use in Japan)

30293-60231 SNA IMF/iX: User Support Guide (For use in Korea)

HP 3000

Bus ness Servers

Page 12
Image 12
HP 30292B manual Additional Implementation Assistance, Support Products