HP 30' Zr30w S-Ips ZR30w, 30' Zr30w S-Ips VM617A4RABA manual Routing and Connecting the Cables

Routing and Connecting the Cables

1.Place the monitor in a convenient, well-ventilated location near the computer.

2.Remove the cable routing cover by pulling it straight off the front of the column. Figure 3-3Removing the Cable Routing Cover

3.Before connecting the cables, route them through the cable routing hole in the column (1) and replace the cable routing cover (2).

Figure 3-4Routing Cables

4.Connect a DVI-D signal cable or DisplayPort signal cable.

6 Chapter 3 Setting Up the Monitor ENWW