Removing the Monitor Pedestal Base

You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm, or other mounting fixture (purchased separately).

This monitor has a Quick Release mechanism that allows you to easily remove and replace the monitor panel to the pedestal base.

CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. Also disconnect any USB cables that are connected to the monitor.

1.Disconnect the signal, power, and USB cables from the back of the monitor.

2.Slide the Quick Release latch (1) on the pedestal base to the side (either right or left).

3.Pull up on the monitor display head (2) to remove it from the base. Figure 3-10Removing the Monitor from the Pedestal Base

ENWW

Removing the Monitor Pedestal Base 11

Page 17
Image 17
HP 30' Zr30w S-Ips VM617A4RABA, 30' Zr30w S-Ips ZR30w manual Removing the Monitor Pedestal Base