To automatically unload images to a Macintosh computer
1Connect the camera to your computer by using the USB cable.
2Turn the camera on.
The status LCD displays PC to indicate the camera is connected to a computer.
3If the welcome screen appears on your computer screen, click OK.
4After a few seconds, the HP Automatic Image Unload window appears. When the countdown timer expires, the software begins unloading new images from the camera to the computer.
To pause the automatic unload, click Pause.
You can set up your HP Automatic Image Unload software so that certain tasks occur automatically after the images are unloaded from the camera. In the HP Automatic Image Unload window, click Options.
When all the new images have been unloaded to your computer, the ArcSoft PhotoImpression software opens and you can view, edit, print, and create projects with your images.
For more information, see the software’s Help.
Tips for unloading images to a Macintosh computer
When you unload images to your computer, the images are still stored in the camera until you delete them. If you take new pictures and then unload images again, the automatic unload software ignores the old images. That way, you do not end up with many copies of the same image on your computer.
If you have no new images in your camera when you connect it
to the computer, the automatic unload does not take place.
You can set up specific tasks to occur automatically after the images have been unloaded from the camera such as deleting images from the camera, printing the images, or putting the images into a photo album layout. To do this, click Options in the HP Automatic Image Unload window.
38 | HP photosmart 318 User Guide |
