HP 35S Scientific 35s not, fff, fff, fff, fff, loop, loop, fffii, fffii, ccccccc, ccccccc, ccccccc, ccccccc, ccccccc, ccccccc, ccccccc, ccccccc —, ccccccc +, final value

iiis the interval for incrementing and decrementing (must be two digits or unspecified). This value does not change. An unspecified value for ii is assumed to be 01 (increment/decrement by 1).

Given the loop–control number ccccccc.fffii, DSE decrements ccccccc to ccccccc — ii, compares the new ccccccc with fff, and makes program execution skip the next program line if this ccccccc ≤ fff.

Given the loop–control number ccccccc.fffii, ISG increments ccccccc to ccccccc + ii, compares the new ccccccc with fff, and makes program execution skip the next program line if this ccccccc > fff.

	1	  
		.
		.
If current value >		.	2	If current value ≤
final value,		  		final value, exit
	1	  
continue loop.				loop.
			2
		  
		.
		.
		.
	1	  
		.
		.
If current value ≤		.	2	If current value >
final value,		  		final value, exit
	1	  
continue loop.				loop.
			2
		  

.

.

.

For example, the loop–control number 0.050 for ISG means: start counting at zero, count up to 50, and increase the number by 1 each loop.

If the loop-control number is a complex number or vector, it will use the real part or first part to control the loop.

The following program uses ISG to loop 10 times in RPN mode. The loop counter (1.010) is stored in the variable Z. Leading and trailing zeros can be left off.

Programming Techniques 14-19