HP 35S Scientific 35s Note:, undefined, Description:, (In RPN mode), still “0-150”, Program Lines:, “12345” into address, storage range is now “0-150”

Program Lines:	Description:
(In RPN mode)
  
 
  
 
  	Defined the storage address range “0-100” and saved
	“12345” into address 100.
 
  
 
  	Saves “67890” into address 150. The defined indirect
	storage range is now “0-150”.
 
  
 
  	Stores 0 into indirect register 100. The defined range is
	still “0-150”.
 
  
 	Display “INVALID (I)”, because address “170” is
	undefined
 

Note:

1.If you want to recall the value from an undefined storage address, the error message “ ”will be shown”. (See A014)

2.The calculator allocates memory for variable 0 to the last non-zero variable. It is important to store 0 in variables after using them in order to release the memory. Each allocated indirect register uses 37 bytes of program memory.

3.There is a maximum of 800 variables.

14-24Programming Techniques