HP 372284-001 manual Introduction, Overview, Features

1

Introduction

Overview

The HP 1x4 USB/PS2 KVM Switch is a four-port keyboard, video, and mouse (KVM) switch combined with a two-port USB hub. As a KVM switch, four computers can be accessed from a single keyboard, mouse, and monitor console. Keyboard and mouse data can be transferred to the computers using a USB connection, or with the traditional PS/2 connection. If a USB connection is used, the two-port USB hub is available to each of the computers, allowing each computer to access any peripherals connected to the hub on a one-computer-at-a-time basis.

Features

•Dual-function KVM/USB switch

•Ability to control four computers and two additional USB devices with one console

NOTE: Both USB peripheral ports on the switch rear panel will not function unless USB KVM cables are used. Cable sets with USB connectors are available for order from the HP website at http://h18004.www1.hp.com/products/servers/proliantstorage/rack-options/list.html#console.

•Dual-interface support—PS/2 or USB keyboard and mouse data transport for PC compatible computers

NOTE: Macintosh and Sun computers must use the USB cable connection. Cable sets with USB connectors are available for order from the HP website at http://h18004.www1.hp.com/products/servers/proliantstorage/rack-options/list.html#console.

•Independent (asynchronous) switching of KVM and peripheral USB ports

•Fully compliant with the USB 1.1 specification; supports transfer rates of 1.5 to 12 Mb/s

•Computer selection available using front panel switches or hotkeys

•LED display for easy status monitoring

•Auto Scan mode for monitoring all computers

•Complete keyboard emulation for error-free booting

•Superior video quality: 2048 x 1536; bi-directional data display channel (DDC2B)

•Switch refresh rate of 60 Hz

HP 1x4 USB/PS2 KVM Switch User Guide 1-1