Firmware Upgrade Utility
5.Click Next to perform the upgrade. As the Upgrade proceeds, status messages appear in the Status Messages panel, and the progress toward completion is shown on the Progress bar.
After the upgrade has completed, a screen appears to inform you that the procedure was successful.
NOTE: If the Upgrade Succeeded screen does not appear, the upgrade failed to complete, and you should repeat the upgrade procedure.
6.Click Finish to close the Firmware Upgrade Utility.
7.Power off the switch by unplugging the KVM cable that you connected to the switch rear panel in step 5 of the “Before You Begin” section.
8.Disconnect the
HP 1x4 USB/PS2 KVM Switch User Guide |
