HP 372284-001 manual Front Panel, Description Function

Introduction

Front Panel

Figure 1-1: Front panel

Item	Description	Function
1	Port	•	Press a switch for longer than 2 seconds to bring the KVM focus, USB
	selection		peripherals, and audio focus to the computer attached to the
	switches		corresponding port.
		• Press a switch for less than 2 seconds to bring only the KVM focus to
			the computer attached to the corresponding port.
		• Press switches 1 and 2 simultaneously for 2 seconds to start Auto
			Scan mode. For more information on Auto Scan mode, refer to “Auto
			Scanning” in chapter 3 of this guide.
		• Press switches 3 and 4 simultaneously for 2 seconds to perform a
			keyboard and mouse reset.
2	Port LEDs	The Port LEDs are built into the Port Selection Switches. The upper LEDs
		are the KVM Port LEDs. The lower LEDs are the USB LEDs.
		KVM Port LEDs
		•	Dim orange—I ndicates that the computer attached to the
			corresponding port is currently online
		•	Bright orange—Indicates tha t the computer attached to the
			corresponding port is selected for the KVM focus
		•	Flashing orange—Indic ates that the computer attached to the
			corresponding port is being accessed under Auto Scan mode

USB LEDs

• Dim green—In dicates that there is a USB cable connection to the computer

• Bright green—I ndicates that the computer attached to the

		corresponding port has access to the USB peripherals
3	USB console	Connectors used for attaching a USB keyboard and mouse or the
	ports	PS/2-to-USB interface adapter.

HP 1x4 USB/PS2 KVM Switch User Guide 1-3