To transmit an aplet

1.Connect the PC or aplet disk drive to the calculator by cable

or

align the two calculators’ infrared ports by matching up the triangle marks on the rims of the calculators. Place the calculators no more than 4 inches (10 cm) apart.

2.Sending calculator: Open the Library, highlight the

aplet to send, and press .

The SEND TO menu appears with the following options:

HP39G (IRDA) = to send via high-speed infrared

HP39/40 (USB) = to send via the USB port

HP39/40 (SER) = to send via the RS232 serial port

USB DISK DRIVE = to send to a disk drive via the USB port

SER. DISK DRIVE = to send to a disk drive via the RS232 serial port

Note: choose a disk drive option if you are using the hp39gs connectivity kit to transfer the aplet.

Highlight your selection and press .

If transmitting to a disk drive, you have the options of sending to the current (default) directory or to another directory.

3.Receiving calculator: Open the aplet library and

press .

The RECEIVE FROM menu appears with the following options:

HP39G (IRDA) = to receive via high-speed infrared

HP39G = to receive via low-speed infrared

HP39/40 (USB) = to receive via the USB port

HP39/40 (SER) = to receive via the RS232 serial port

USB DISK DRIVE = to receive from a disk drive via the USB port

SER. DISK DRIVE = to receive from a disk drive via the RS232 serial port

Extending aplets

19-5