HP 39gs Graphing manual Mode settings, You use the Modes input form to set the modes for Home

Mode settings

You use the Modes input form to set the modes for HOME.

H I N T Although the numeric setting in Modes affects only HOME, the angle setting controls HOME and the current aplet. The angle setting selected in Modes is the angle setting used in both HOME and current aplet. To further configure an aplet, you use the SETUP keys (

and ).

Press	MODES to access the HOME MODES input
form.
Setting		Options
Angle		Angle values are:
Measure		Degrees. 360 degrees in a circle.
		Radians. 2π radians in a circle.
		Grads. 400 grads in a circle.
		The angle mode you set is the angle
		setting used in both HOME and the
		current aplet. This is done to ensure
		that trigonometric calculations done in
		the current aplet and HOME give the
		same result.
Number		The number format mode you set is the
Format		number format used in both HOME
		and the current aplet.
		Standard. Full-precision display.
		Fixed. Displays results rounded to a
		number of decimal places. Example:
		123.456789 becomes 123.46 in
		Fixed 2 format.
		Scientific. Displays results with an
		exponent, one digit to the left of the
		decimal point, and the specified
		number of decimal places. Example:
		123.456789 becomes 1.23E2 in
		Scientific 2 format.

1-10 Getting started