905.bk : ch_6.fb4 Page 1 Thursday, October 22, 1998 9:51 AM

Connecting to a Windows NT Server 3.51

Microsoft Windows 95 SR2

Connecting to a Windows NT Server 3.51

Microsoft Windows 95 SR2

Requirements

•HP Vectra with Plug and Play enabled, running Windows 95 SR2.

•3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1.

•Vectra VL8 File Name: OEMSETUP.INF Size: 49.3KB Date: 12/1/97

•Vectra VL7 File Name: El90X.SYS Size: 45KB Date: 3/21/97

•Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

•

Network Driver Optimization

Normal

•

Full Duplex

 

 

Auto Select (N-WAY)

•

Boot PROM

 

 

Disabled

•

Media Type

 

 

Auto Select (N-WAY)

 

 

 

 

 

 

 

 

 

 

Vectra VL8

 

Vectra VL7

 

 

 

 

 

 

 

I/O Base Address

 

FCC0h (PCI)

 

FC40h(PCI)

 

 

 

 

 

 

 

Interrupt Request

 

9 (PCI)

 

9 (PCI)

 

 

Level

 

 

 

 

 

 

 

 

 

 

 

 

Procedure

1With the HP Vectra turned off, install the 3COM Etherlink 3C905 adapter card into a PCI slot.

2Connect network cable media to the 3COM 3C905 card.