905.bk : ch_7.fb4 Page 1 Thursday, October 22, 1998 9:51 AM
Connecting to a Windows NT Server 3.51
Windows NT Workstation 3.51
Windows NT Workstation 3.51
Connecting to a Windows NT Server 3.51
Requirements
•HP Vectra with Microsoft Windows NT Workstation 3.51 installed.
•3COM Etherlink 3C905 ethernet card and drivers disk ver. 2.1.
•Vectra VL8 Driver Name: DRMONNT.INF Size: 16KB Date: 1/23/98
•Vectra VL7 Driver Name: OEMSTEUP.INF Size: 41KB Date: 3/14/97
•Microsoft Windows NT Workstation 3.51 and Service Pack Media.
•Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
• | Network Driver Optimization | Normal | ||||
• | Full Duplex |
|
| Auto Select | ||
• | Boot PROM |
|
| Disabled | ||
• | Media Type |
|
| Auto Select | ||
|
|
|
|
|
|
|
|
|
| Vectra VL8 |
| Vectra VL7 |
|
|
|
|
|
|
| |
I/OBaseAddress |
| FCC0h (PCI) |
| FC40h (PCI) |
| |
|
|
|
|
|
| |
Interrupt Request |
| 9 (PCI) |
| 9 (PCI) |
| |
| Level |
|
|
|
|
|
|
|
|
|
|
|
|
Procedure
1With the HP Vectra turned off, install the 3COM Etherlink 3C905 adapter card into a PCI slot.