905.bk : ch_10.fb4 Page 1 Thursday, October 22, 1998 9:51 AM
Connecting to a Windows NT Server 4.0
Windows 95 SR2
Connecting to a Windows NT Server 4.0
Windows 95 SR2 | Requirements |
| • HP Vectra with Plug and Play enabled, running Windows 95 SR2. |
| • 3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1. |
| • Vectra VL8 Driver Name: OEMSETUP.INF Size: 49.3KB Date: 12/1/97 |
| • Vectra VL7 Driver Name: El90X.SYS Size: 45KB Date: 3/21/97 |
| • Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/ |
| IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. |
Device Configuration
• | Network Driver Optimization | Normal | ||||
• | Full Duplex |
|
| Auto Select | ||
• | Boot PROM |
|
| Disabled | ||
• | Media Type |
|
| Auto Select | ||
|
|
|
|
|
|
|
|
|
| Vectra VL8 |
| Vectra VL7 |
|
|
|
|
|
|
| |
I/OBaseAddress |
| FCC0h (PCI) |
| FC40h (PCI) |
| |
|
|
|
|
|
| |
Interrupt Request |
| 9 (PCI) |
| 9 (PCI) |
| |
| Level |
|
|
|
|
|
|
|
|
|
|
|
|
Procedure
1With the HP Vectra turned off, install the 3COM Etherlink 3C905 adapter card into a PCI slot.
2Connect network cable media to the 3COM 3C905 card.