905.bk : ch_8.fb4 Page 1 Thursday, October 22, 1998 9:51 AM
Connecting to a Windows NT Server 3.51
Windows NT Workstation 4.0
Windows NT Workstation 4.0
Connecting to a Windows NT Server 3.51
Requirements
•HP Vectra with Windows NT Workstation 4.0 Service Pack 3.
•3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1.
•Vectra VL8 Driver Name: 3C90X.SYS Size: 74KB Date: 1/09/98
•Vectra VL7 Driver Name: 3C90X.INF Size: 71KB Date: 11/25/96
•Microsoft Windows NT Workstation 4.0 and Service Pack Media. (If you have a
•Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
• | Network Driver Optimization | Normal | ||||
• | Full Duplex |
|
| Auto Select | ||
• | Boot PROM |
|
| Disabled | ||
• | Media Type |
|
| Auto Select | ||
|
|
|
|
|
|
|
|
|
| Vectra VL8 |
| Vectra VL7 |
|
|
|
|
|
|
| |
I/O Base Address |
| FCC0h |
| FCC0h (PCI) |
| |
|
|
|
|
|
| |
Interrupt Request |
| 9 (PCI) |
| 9 (PCI) |
| |
| Level |
|
|
|
|
|
|
|
|
|
|
|
|
Procedure