905.bk : ch_9.fb4 Page 1 Thursday, October 22, 1998 9:51 AM

Connecting to a Windows NT Server 4.0

Windows for Workgroups ver. 3.11

Connecting to a Windows NT Server 4.0

Windows for Workgroups ver. 3.11

Requirements

•HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.

•3COM Etherlink 3C905 Ethernet card and drivers disk ver. 4.3.

•DOS ODI Name (Vectra VL7 alone): EL90X.DOS Size: 46KB

Date: 12/20/96

•NDIS Driver Name: El90X.386 Size: 72KB Date: 1/29/98

•Microsoft Windows NT Server 4.0 machine that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

•

Network Driver Optimization

Normal

•

Full Duplex

 

 

Auto Select (N-WAY)

•

Boot PROM

 

 

Disabled

•

Media Type

 

 

Auto Select (N-WAY)

 

 

 

 

 

 

 

 

 

 

Vectra VL8

 

Vectra VL7

 

 

 

 

 

 

 

I/OBaseAddress

 

FCC0h (PCI)

 

FCC0h (PCI)

 

 

 

 

 

 

 

Interrupt Request

 

9 (PCI)

 

9 (PCI)

 

 

Level

 

 

 

 

 

 

 

 

 

 

 

 

Procedure

1With the HP Vectra turned off, install the 3COM Etherlink III 3C905 adapter card into a PCI slot.