HP 4000 K210 Check, light, Print, Resume, lights, Resume, Resume, On light, Solution, Cartridge, Description, problem a Solve

Chapter 6

problem a Solve

(continued)

On light	Resume	Check	Description	Solution
	light	Print
		Cartridge
		lights
On	Off	Both	The print cartridge	1.	Remove black
		blinking.	(s) may be		print cartridge.
			defective.	2.	Close door.
				3.	If the cartridge
					LEDs are still
					blinking, replace
					the tri-color print
					cartridge. If the
					cartridge LEDs
					are not blinking,
					replace the
					black print
					cartridge.
On	Blinking	Off	The product is out	Load paper and
			of paper.	press Resume.
			The product has a	Clear the paper jam,
			paper jam.
				and then press
				Resume.
Fast	Off	Off	The front access	Close the front
blinking			door or the print	access door or the
			cartridge access	print cartridge
			door is open.	access door.
On	Off	Fast	The print cartridges	Install or remove and
		blinking	are missing or not	reinsert print
			seated correctly.	cartridges.
			The print cartridge
				Remove the print
			might be defective.
				cartridge, remove
			The tape was not	tape, and reinsert the
			removed from one	print cartridge.
			or both print
				The print cartridge
			cartridges.
			The print cartridge	might not be
				supported for use in
			is not intended for
				the product. For
			use in this product.
				more information
				about compatible
				print cartridges, see
				“Order ink supplies”
				on page 26
On	Off	Both fast	The print carriage is	Open the front
		blinking	stalled.	access door, and
				check that the
				carriage is not
				blocked.
Fast	Fast	Both fast	The product has a	1.	Turn off the
blinking	blinking	blinking	fatal error.		product.
				2.	Unplug the
					power cord.

44 Solve a problem