Hard drive

NOTE: The hard drive spare part kit does not include the hard drive connector cable, bracket, or screws. The hard drive connector cable is included in the Cable Kit, spare part number 645968-001. The hard drive bracket and screws are included in the Hard Drive Hardware Kit, spare part number 645969-001.

Description

Spare part number

 

 

For use only with Compaq 435 and Compaq 436 computer models:

 

 

 

250-GB, 7200-rpm

649902-001

 

 

For use with all computer models:

 

 

 

750-GB, 5400-rpm

634250-001

 

 

640-GB, 5400-rpm

603785-001

 

 

500-GB, 7200-rpm

634925-001

 

 

500-GB, 5400-rpm

634638-001

 

 

320-GB, 7200-rpm

641672-001 and

 

634862-001

 

 

320-GB, 5400-rpm

645193-001 and

 

622643-001

 

 

250-GB, 7200-rpm

634861-001

 

 

Before removing the hard drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 43).

5.Remove the memory module/wireless module compartment cover (see WLAN module on page 44).

Remove the hard drive:

1.Loosen the captive screw (1) that secures the hard drive compartment cover to the computer.

48

Chapter 4 Removal and replacement procedures