Top cover

NOTE: The top cover spare part kit includes the TouchPad and TouchPad cable.

Description

Spare part number

 

 

In pewter finish for use with all computer models

646667-001

 

 

In charcoal gray finish for use only with Compaq 435 and Compaq 436 computer models

645963-001

 

 

Before removing the top cover, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 43), and then remove the following components:

●Memory module/wireless module compartment cover (see WLAN module on page 44)

●Hard drive (see Hard drive on page 48)

●Keyboard (see Keyboard on page 53)

NOTE: When replacing the top cover, be sure that the following components are removed from the defective top cover and installed on the replacement top cover:

●Power button board and cable (see Power button board on page 60)

●TouchPad button board and cable (see TouchPad button board on page 61) Remove the top cover:

1.Close the computer.

2.Turn the computer upside down, with the front toward you.

56

Chapter 4 Removal and replacement procedures