10.Remove the power connector (4).
Reverse this procedure to install the power connector cable.
Display assembly
Description | Spare part number |
| |
|
|
For use with all computer models: |
|
|
|
AntiGlare in pewter finish | |
|
|
BrightView in pewter finish | |
|
|
For use only with Compaq 435 and Compaq 436 computer models: |
|
|
|
AntiGlare in charcoal gray finish | |
|
|
BrightView in charcoal gray finish | |
|
|
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 43).
68 | Chapter 4 Removal and replacement procedures |