Brother MFC-7300C manual Assembly, SET Cartridges PLS Open Cover, Connect the handset

■Do not use the telephone to report a gas leak in the vicinity of the leak.

■For PLUGGABLE EQUIPMENT, the socket-outlet should be installed near the equipment and should be easily accessible.

■To reduce the risk of shock or fire, use only a No. 26 AWG or larger telecommunications line cord.

Assembly

1Connect the handset.

Connect the curled handset cord to the MFC and the other end to the handset.

2Connect the power cord.

There is no ON/OFF switch. When you plug in the power cord, the power goes on and the screen alternately displays.

SET CARTRIDGES

PLS OPEN COVER

WARNING

■The MFC must be grounded using a 3-prong plug.

■Since the MFC is grounded through the power outlet, you can protect yourself from potentially hazardous electrical conditions on the telephone network by keeping the power to your MFC on when you connect it to a telephone line. Similarly, you can protect yourself when you want to move your MFC, by disconnecting the telephone line first, and then the power cord.

■Lightning and power surges can damage this product! We recommend that you use a quality surge protection device on the AC power line as well as on the telephone line, or unplug the lines during a lightning storm.

3Connect the telephone line cord.

Connect one end of the telephone line cord to the jack on the MFC and the other end to a modular wall jack.

A S S E M B L Y A N D C O N N E C T I O N S 2 - 3