Press 2 if you are finished choosing settings, and go to the next step.
Resolution
When you have an original in the ADF, you can use the Resolution key to change the default setting. Press Resolution continuously until you see the lights change to the setting you want. For standard, turn Fine & Photo lights off. (See Multiple Resolution Transmissions, page 7-11.)
Standard—For most typed documents. (No lights)
Fine—Good for small print; transmits slower than standard resolution.
Photo—Use when document has varying shades of gray; slowest transmission time.
Color fax—Use to send the original in color.
You can also change the fax resolution to S.Fine. Please see Multiple Resolution Transmission, page 7-11.
Contrast
If your original is very light or very dark, you might want to set the contrast accordingly. Use S.LIGHT to send a very light original. Use S.DARK to send a very dark original.
Press 1 if you want to select additional settings. The display returns to the SETUP SEND menu— OR
1.YES 2.NO
OTHER SETTINGS?
ACCEPTED
When you send a fax you can choose any combination of the available settings: add a coverpage and select a comment; set the contrast or resolution; send using overseas mode, call reservation, delayed
fax, polling transmission or real time transmission. After each function is accepted, the display will ask if you want to enter other settings:
Sending Faxes with Multiple Settings

Note

1Place the original face down in the ADF.

2Press Function, 1, 3, 3.

3Press or to select AUTO, S.LIGHT or S.DARK and press Set.

4Press 1 if you want to select additional settings. The display returns to the SETUP SEND menu— OR—Press 2 if you are finished choosing settings and go to step 5.

5Enter a fax number

6Press Start to send a fax.

S E T U P S E N D

7 - 2

Page 69
Image 69
Brother MFC-7300C manual T U P S E N D