Brother MFC-7300C manual Filter Core

23Click OK.

24All the drivers have been installed. Now you can print and scan.

Note If you want to install PaparPort® , MFLPro, go to the CD section. (See Installing the Brother Software on page 14-27.)

Using a USB Cable to Connect the MFC to the PC (Using Windows® 98, 98SE, ME and Windows® 2000 Professional Only)

Note

Note

IMPORTANT

To install the software using Windows® 2000 Professional, you must be logged on as the Administrator.

Before you can connect the MFC to your computer, you must purchase a USB cable that is no longer than 6 feet (1.8 meters).

If you are using a bi-directional IEEE-1284 comliant parallel cable, see Using a bi-directionalIEEE-1284 compliant parallel cable to Connect the MFC to the PC on page14-2.

Notice to Computer Users

A small filter core and cable tie are enclosed in a vinyl bag with your MFC. PLEASE SAVE THESE PARTS. You will need them in the future if you connect the MFC to a Computer. For optimal performance, use a USB Cable with the enclosed Filter core and Cable tie.

When you use a Computer with your MFC, please attach the enclosed Filter core to a USB Cable.

1Attach the cable tie 2 inches or less from the end of the USB Cable that will be connected to the MFC.

2Attach the filter core between the USB Cable Connector and the Cable Tie by pressing until you hear a click.

Filter Core Cable Tie

Filter Core

USB Cable

Cable Tie

USB Cable

To MFC connector

S E T T I N G U P T H E M F C A N D P C T O W O R K T O G E T H E R 14 - 17