Brother MFC-7300C manual Paper Thickness, Scaling, Paper Source, Reverse Order, Feeder

In multiple page jobs that are collated, a complete set of pages in a job are printed followed by another complete set of pages. For example, printing 2 copies of a 3 page document, the MFC prints Page 1, Page 2, Page 3, then Page 1, Page 2, and Page 3 in order. In this case, the MFC starts printing after processing all the print data so that it takes a longer time for collated printing than uncollated printing.

Reverse Order

The MFC normally prints Page 1 and ejects it face-up so that the following pages are stacked on top of previous pages. (Page 5, Page 4, Page 3 ..... Page 1)

When you want to get correct-ordered printouts, use this function. The MFC spools the job in your computer and sends the data starting from the last page to the printer. Since the MFC prints from the last page forward, the printouts are stacked Page 1, 2, 3, ...Page 5. Please note that this function takes more time.

Paper Thickness

You can use the following types of paper thickness for your printer. To get the best position printing, select the correct types of paper thickness you wish

Regular

Thin

Thick

Thicker

When you use ordinary plain paper, select Regular. When you use thin paper, select Thin.

When you use envelopes or thicker paper, select Thick or Thicker.

Scaling

Use this function to reduce or enlarge your document, from 50% to 200%.

2 in 1

Two pages are printed on one sheet at a reduced size. If you checked the “2 in 1 box”, you cannot specify the scaling percentage manually.

Note If your application software contains a similar function to this, both settings will be effective. Do not use the two selections simultaneously!

Paper Source

Feeder

The multi-purpose sheet feeder is primarily used for printing on standard-size paper and envelopes.

16 - 4 P R I N T E R D R I V E R S E T T I N G S