Brother MFC-7300C manual Quick Reference Guide, Sending Faxes, Automatic Transmission

vii

Press Function, 1, 5, 2.

1

Press Stop.

Storing Speed Dial Numbers

6

4 Enter a name (or leave it blank) and press Set.

5 Press or to select FAX, TEL, or FAX/TEL and press Set.

Enter a number (up to 20 digits) and press Set.

3

Press Receive Mode to select FAX/TEL, TAD, MANUAL, or FAX ONLY. If you select FAX/ TEL, make sure to set Ring Delay and F/T Ring Time.

Manual Reception

1 Pick up the handset.

2 Press Start if you hear fax tones (beeps).

3 When the screen displays RECEIVE, replace the handset.

Storing Numbers

Storing One Touch Dial Numbers

1 Press Function, 1, 5, 1.

2 Press the One Touch key where you want to store the number.

Sending a Cover Page

Enter the fax number. Press Start.

Receiving Faxes

Select Receive Mode

6

7

5 Press 1 to select additional settings

— OR—Press2 to fax.

For the next fax only, press

to select ON and press Set.

or

4

Quick Reference Guide

Sending Faxes

Automatic Transmission

1Place the original face down in the ADF.

2Enter the fax number using One Touch, Speed Dial, Search or the dial pad.

3Press Start.

1Place the original face down in the ADF.

2Press Function, 1, 3, 1.

3When NEXT FAX ONLY? appears, press Set.

4Press or to select ON (or OFF) and press Set.

5Press or to select a comment and press Set.

6Enter two digits to indicate the number of pages being sent and press Set.

7Press 1 to select additional settings

— OR—Press 2 if you are ready to fax.

8Enter the fax number.

9Press Start.

Real Time Transmission

You can send faxes in real time.

1Place the original face down in the ADF.

2Press Function, 1, 3, 9.

3Press or to select ON and press Set— OR—For the next

transmission only, press or to select NEXT FAX ONLY and press Set.