Brother MFC-7300C manual Access Codes and Credit Card Numbers, Search

Access Codes and Credit Card Numbers

Sometimes you may want to choose from among several long distance carriers when you make a call. Rates may vary depending upon the time and destination. To take advantage of low rates, you can store the access codes or long-distance carriers as One Touch numbers. You can store these long dialing sequences by dividing them and setting them up on separate keys in any combination. You can even include manual dialing using the dial pad. The combined number will be dialed in the order you entered it, as soon as you press Start. (See Storing One Touch Dial Numbers, page 8-1.)

You can store “555” on One Touch key 3 and “7000” on One Touch key 2. If you press One Touch 3, 2, and Start, you can dial “555-7000”. To temporarily change a number, you can substitute part of the number with manual dialing using the dial pad. For example, to change the number to 555-7001 you could press One Touch 3 and press 7, 0, 0, 1 using the dialing pad.

Note If you must wait for another dial tone at any point in the dialing sequence, store a pause at that point in the number by pressing Redial/Pause. Each key press adds a 3.5 second delay.

Search

You can search for names you have stored in One Touch and Speed Dial memories. Names are stored alphabetically. (See Storing One Touch Dial Numbers, page 8-1and Storing Speed Dial Numbers, page 8-2.)

1Press Search/Speed Dial, then enter the first letter of the name you’re looking for.

2Press or to search the memory.

3When the screen displays the name you want to call, pick up the handset.

4Press Start to begin dialing.

5When the call is over, hang up.

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S 8 - 6