Optical drive (select models only)

NOTE: The optical drive spare part kit includes a bezel and bracket.

Description

Spare part number

 

 

Blu-ray Disc ROM with SuperMulti DVD±R/RW Double-Layer Drive with LightScribe

645989-001

 

 

DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe

645988-001

 

 

Before removing the optical drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 43).

5.Remove the memory module/wireless module compartment cover (see WLAN module on page 44).

6.Remove the hard drive compartment cover (see Hard drive on page 48).

Remove the optical drive:

1.Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.

2.Insert an unbent paper clip or similar thin tool into the optical drive tab access (2) to release the optical drive tray from the optical drive.

3.Remove the optical drive (3) by sliding it out of the optical drive bay.

Component replacement procedures

51