HP 433, 435 manual USB light, Blinks as if, Are being, Recharged, No batteries Installed

Problem	Possible cause	Solution
The camera	Battery voltage	The camera will not attempt to
batteries will	is too low for	charge batteries that may be
not charge.	charging to	damaged or over-discharged.
(continued)	start.	Remove the batteries from the
		camera and charge them in an
		external battery charger, then try
		them in the camera again. If this
		does not work, it is likely that one
		or more of the batteries are bad.
		Purchase new NiMH batteries
		and try again.
	The wrong AC	Use only the HP AC power
	power adapter	adapter approved for use with
	is being used.	this camera. See Purchasing
		camera accessories on page 93.
	The batteries	NiMH batteries degrade over
	are damaged	time and can fail. If the camera
	or bad.	detects a problem with the
		batteries, it will not start charging
		or will stop charging prematurely.
		Purchase new batteries.
The Memory/	The camera	Do nothing. The blinking is
USB light	does not	harmless and should stop after
blinks as if	recognize that	5-30 minutes.
the batteries	there are no
are being	batteries
recharged,	installed.
but there are
no batteries
installed.

66 hp photosmart 430 series user’s manual