HP 445 manual Setting a Password, At the prompt, type

Installation

Phase 4: Initialize and Verify the Router

Setting a Password:

1.From the Main menu (page 1-27), select the Network Control Language Interpreter (NCL). The NCL prompt then appears at the bottom of the screen. It will be either

DEFAULT_CONFIG:

as shown below, or another name you have already configured for your system.

Installation 1

NCL prompt

Figure 1-27. The NCL Screen with Default Prompt

2.At the prompt, type

password

and press [Return].

3.Follow the prompts to set the manager password.

4.To set the user password, repeat this procedure, substituting user for manager in step 3.

1-35