Description | Spare part number |
|
|
Palm rest for | |
|
|
Palm rest for | |
TouchPad) |
|
|
|
Before removing the palm rest, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 55).
5.Remove the switch cover and keyboard (see Switch cover and keyboard on page 56).
Remove the palm rest:
1.Position the computer
2.Remove the three Phillips PM2.0×3.0 screws (1) that secure the palm rest to the computer.
3.Slide the palm rest to the right (2), and then lift and rotate the rear edge (3) towards the display to gain access to the TouchPad cable.
