7.Lift the bezel (4) until it disengages completely.

8.If it is necessary to replace the webcam module, gently pull the webcam module away from the double-sided tape on the display enclosure (1) and disconnect the webcam cable from the module

(2). The webcam module and cable can be ordered by using spare part number 598671-001.

NOTE: To replace the webcam module in the display enclosure, align the holes on the webcam module with the pins on the display enclosure and press onto the double-sided tape.

9.If it is necessary to replace the display hinges, remove the six Torx M2.5×5.0 screws (1) that secure the hinges to the display housing.

100 Chapter 4 Removal and replacement procedures