Hood Sensor
Description | Spare part number |
|
|
Hood sensor board | |
|
|
Hood sensor cable | |
|
|
The hood sensor is located just below the fan sink. It is secured with one screw and has one connector. Figure
To remove the hood sensor:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 43).
2.Remove the small rear cover (see Small Rear Cover on page 44).
3.Remove the port cover (see Port Cover on page 45).
4.Remove the stand (see Stand on page 46).
5.Remove the drive cover (see Optical Drive on page 47).
6.Remove the memory cover (see Memory on page 53).
7.Remove the upper rear panel (see Upper Rear Panel on page 55).
8.Remove the I/O panel (see Rear I/O Cover on page 67).
9.Remove the outer/left panel (see Outer/Left Rear Panel on page 75).
10.Remove the tape (1) and screw (2) that secure the board to the computer.
Hood Sensor | 85 |