Using the Transmit Menu to JetSend the Current or All Marked Images
To JetSend the current image or all marked images to a
1Set the camera mode dial to Review mode 
.
2Power on the camera if you haven’t already.
3Either select one image or mark multiple images in the Review mode screen that you want to JetSend. (See “Selecting Images” on page 30 and “Marking and Unmarking Images” on page 31 for more information.)
4Press the MENU button on the back of the camera. The Review mode menus are displayed.
5Press the right arrow on the
6Press the down arrow on the
7Set your printer to receive images to print. See your printer’s documentation for details.
8Aim the camera’s infrared window (see Figure 26 on page 46) at the printer’s infrared sensor, and place the camera about 10 inches away from the printer.
9Press the left (Send) soft key on the camera. The camera immediately starts a JetSend session, searches for a compatible printer, and sends the current or all marked images to the printer.
During the transfer, the image LCD reads: “Sending X image(s)...” and shows a progress bar. You can cancel the transfer at any time by pressing the middle (Stop) soft key on the camera. A confirmation screen will display to show that the Send was successful.
10 Press the right (Done) soft key when you have finished transmitting images to the printer.
Chapter 5: Sharing Images | 47 | JetSending Images to a Printer |
|
|
|