Problem

Solution

 

 

The camera is powered

Š Try powering the camera off and then on again.

on, but when I press a

Š Remove the batteries or unplug the HP AC power adapter. Then reinstall the

button, the camera does

batteries or plug in the AC power adapter, and power on the camera again.

not respond

 

 

 

I always have to re-set the

This will happen if either you remove the batteries from the camera, or you remove

date and time after I

the batteries and unplug the HP AC power adapter, for more than 5 minutes. (Note

change the batteries in

that even if the batteries are drained, the date and time will remain set as long as

the camera or unplug the

you leave the drained batteries in the camera.)

HP AC power adapter

 

from the camera

When changing batteries, try to put the new batteries in within 5 minutes of when

 

you remove the old batteries. Similarly, if you are using the HP AC power adapter,

 

either leave batteries in the camera (even if the batteries are drained) when you

 

unplug the adapter, or unplug the adapter for less than 5 minutes at a time.

 

 

The rechargeable HP

You must recharge all 4 HP NiMH batteries after fully draining them four times for

NiMH batteries I’m using

the batteries to reach their optimum capacity and performance. For more

don’t seem to power the

information, see “Using the HP NiMH Batteries and Recharger” on page 108.

camera for very long

 

 

 

The incorrect language is set on the camera

1.Set the camera mode dial to Capture mode .

2.Power on the camera if you haven’t already.

3.Press the MENU button to display the Capture mode menus on the image LCD.

4.Press the right arrow on the 4-way controller three times to move to the Preferences menu.

5.Press the down arrow on the 4-way controller seven times to move to the Language menu option.

6.Press the left (Edit) soft key. The Language submenu is displayed.

7.Press the down or up arrow on the 4-way controller to highlight the language you want.

8.Press the left (Select) soft key to select the highlighted language and to exit this screen. You return to the Preferences menu of Capture mode, and the camera is now using the language you set.

9. Press the right (Exit) soft key to exit the menu.

Chapter 7: Troubleshooting

89

Troubleshooting Common Problems