If your PC hard disk drive is blank or corrupted, press R to perform a full system recovery. Insert the remaining CDs when directed.

13When the recovery program finishes, click Restart to restart the computer.

14Before the computer restarts, the CD tray ejects. Remove the CD.

15Return the BIOS to the original setting. Enter the BIOS setup program during the startup: When the blue screen with the HP Invent logo appears, press the F1 key on the keyboard until Entering SETUP is displayed. (You only have a few seconds to press the F1 key before the normal startup process continues.) Wait until the BIOS setup program opens.

16Press the right arrow key to select Boot.

17Press the down arrow key to select

Boot Device Priority, and then press Enter.

18Change the first boot device using one of these methods:

Press the down arrow key or up arrow key to select the CD-ROMitem. Press the – (minus) key to move the CD-ROMitem down until it is the third item in the list.

Or

Recovery

 Press the down arrow key to highlight the

 

First Boot Device selection. Press the + (plus)

 

key until Floppy is the selection.

 

19Press the F10 key to save the changes and exit BIOS.

20With Yes selected, press Enter. After the computer restarts, a series of startup screens appear. To proceed with the initial Microsoft Windows setup, you must answer a few questions.

Quick Start Guide 85