Locate the RJ-45 port on the back of the PC. (Refer to the illustration that matches your PC.)

RJ-45 port

To connect the network interface adapter to the network:

1Plug the network cable into the RJ-45 port on the network adapter. The port is located on the back of the PC.

Note: Do not connect a telephone cable (RJ-11 connector) to the network adapter port (RJ-45).

2Plug the other end of the network cable into a 10BaseT or a 100BaseT port on the network hub.

Note: The hub is a device to which all computers on the network are connected.

48

HP Pavilion home PC

Warning: DO NOT plug the network cable into a telephone line. Although the plug on the network cable looks similar to the plug on a telephone cable, they are not the same.

3With the PC turned on, check the LEDs (light-emitting diodes) on the network adapter. (Refer to the illustration that matches your system.)

LEDs

10 LNK — Lit green when connected to a 10BaseT port

100 LNK — Lit green when connected to a 100BaseT port

ACT — Lit during network data transfer activity