●If you are installing a 2.5-inch hard drive into either of the lower two bays (bays 5 and 6), do the following:

◦Slide the drive into the bay adapter bracket, ensuring the connector on the drive is fully inserted into the connector on the adapter bracket.

Figure 6-23Sliding the 2.5-inch Drive in the Adapter Bracket

◦Secure the drive to the bay adapter bracket by installing four black M3 adapter bracket screws through the sides of the bracket into the drive.

Figure 6-24Securing the Drive in the Adapter Bracket

100 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis