HP Elite 8300 manual 310

Table 11-1Numeric Codes and Text Messages (continued)

Control panel message	Description	Recommended action
2201-MEBx Module did not checksum	Memory error during POST execution of the	1.	Reboot the computer.
correctly	Management Engine (ME) BIOS Extensions	2.	Unplug the power cord, re-seat the
	option ROM.
			memory modules, and reboot the
			computer.
		3.	If the memory configuration was
			recently changed, unplug the power
			cord, restore the original memory
			configuration, and reboot the
			computer.
		4.	If the error persists, replace the system
			board.
2202-PMM Deallocation Error during MEBx	Memory error during POST execution of the	1.	Reboot the computer.
cleanup	Management Engine (ME) BIOS Extensions	2.	Unplug the power cord, re-seat the
	option ROM.
			memory modules, and reboot the
			computer.
		3.	If the memory configuration was
			recently changed, unplug the power
			cord, restore the original memory
			configuration, and reboot the
			computer.
		4.	If the error persists, replace the system
			board.
2203-Setup error during MEBx execution	MEBx selection or exit resulted in a setup	1.	Reboot the computer.
	failure.	2.	Unplug the power cord, re-seat the
			memory modules, and reboot the
			computer.
		3.	If the memory configuration was
			recently changed, unplug the power
			cord, restore the original memory
			configuration, and reboot the
			computer.
		4.	If the error persists, replace the system
			board.
2204-Inventory error during MEBx execution	BIOS information passed to the MEBx	1.	Reboot the computer.
	resulted in a failure.	2.	If the error persists, update to the latest
			BIOS version.
		3.	If the error still persists, replace the
			system board.
2205-Interface error during MEBx execution	MEBx operation experienced a hardware	1.	Reboot the computer.
	error during communication with ME.	2.	If the error persists, update to the latest
			BIOS version.
		3.	If the error still persists, replace the
			system board.

298 Chapter 11 POST Error Messages