Bezel Blank
Description | Spare part number |
|
|
Bezel blank | |
|
|
On some models, there is a bezel blank covering the external drive bay that needs to be removed before installing a drive. To remove a bezel blank:
1.Remove the computer access panel (Access Panel on page 208).
2.Remove the front bezel (Front Bezel on page 209).
3.To remove the bezel blank, push the two retaining tabs that hold the bezel blank in place towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2).
Figure
212 Chapter 9 Removal and Replacement Procedures