Drives

Description

Spare part number

 

 

16X SATA DVD±RW drive

660408-001

 

 

16X SATA DVD-ROM drive

581599-001

 

 

Blu-ray BD-RW SuperMulti DL Drive

656792-001

 

 

1 TB, 7200 rpm SATA hard drive

636930-001

 

 

 

500

GB, 7200 rpm, 2.5-inch, self-encrypting (SED), SATA hard drive

696442-001

 

 

 

500

GB, 7200 rpm SATA hard drive

636929-001

 

 

 

250

GB, 7200 rpm SATA hard drive

636927-001

 

 

 

256

GB Solid State Drive (SSD), self-encrypting (SED), SATA 6.0

680020-001

 

 

 

180

GB Solid State Drive (SSD), SATA 6.0

 

 

 

 

160

GB Solid State Drive (SSD), SATA 3.0

646809-001

 

 

 

128

GB Solid State Drive (SSD), SATA 2.0

665961-001

 

 

 

120

GB Solid State Drive (SSD), SATA 2.0

661841-001

 

 

20 GB Solid State Drive (SSD), SATA

683305-001

 

 

 

When installing drives, follow these guidelines:

●The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on the system board labeled SATA0. If you are adding a second hard drive, connect it to the light blue connector on the system board labeled SATA1.

●Connect the first SATA optical drive to the white SATA connector on the system board labeled SATA2. If you are adding a second optical drive connect it to the black SATA connector on the system board labeled ESATA. If the ESATA connector is already populated, connect the second optical drive to the light blue connector on the system board labeled SATA1.

●Connect an optional eSATA adapter cable to the black SATA connector on the system board labeled ESATA.

●Connect a media card reader USB cable to the USB connector on the system board labeled

MEDIA.

●The power cable for the SATA optical drives is a two-headed cable this is plugged into the system board with the first connector routed to the top 5.25-inch bay and the second connector routed to the bottom 5.25-inch bay.

●The power cable for the SATA hard drives is a two-headed cable this is plugged into the system board with the first connector routed to the bottom 3.5-inch bay and the second connector routed to the top 3.5-inch bay.

●The system does not support Parallel ATA (PATA) optical drives or PATA hard drives.

●You must install guide screws to ensure the drive will line up correctly in the drive cage and lock in place. HP has provided extra guide screws for the drive bays (four 6-32 isolation mounting guide screws and eight M3 metric guide screws), installed on the side of the drive bays. The

138 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis