Description

Spare part number

 

 

For use in HP EliteBook 8560p models

641201-001

Included in Display Panel Support Kit, for use in HP ProBook 8560p models

657829-001

 

 

Display Panel Support Kit (includes WLAN antennas, WWAN antennas, and display enclosure)

 

 

 

For use in HP ProBook 6560b models

657831-001

 

 

For use in HP EliteBook 8560p models

657829-001

 

 

For a list of display spare parts, see Display components on page 34.

Before removing the display assembly, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 58).

5.Remove the following components:

a.Bottom door (see Bottom door on page 64).

b.Hard drive (see Hard drive on page 69)

c.Optical drive (see Optical drive on page 65)

d.WLAN module (see WLAN module on page 76)

e.WWAN module (see WWAN module on page 74)

f.Fan (see Fan on page 85)

g.Heat sink (see Heat sink on page 86)

h.Modem module (see Modem module on page 83)

i.Keyboard (see Keyboard on page 92)

j.Bottom cover (see Bottom cover on page 94)

k.System board (see System board on page 106)

Remove the display assembly:

1.Position the computer right-side up with the front toward you.

2.Open the computer as far as possible.

3.Remove the four Phillips PM2.5×4.5 screws (1) that secure the display to the computer.

112 Chapter 4 Removal and replacement procedures