Display assembly (panel, bezel, webcam, microphone)
All display assemblies include WLAN antenna transceivers and cables. WWAN models include 2 WWAN antenna transceivers and cables.
NOTE: Full
This section describes removing components that do not require that you entirely remove the display assembly from the computer. You can remove the display bezel, webcam/microphone module, and display panel with the display assembly still attached to the computer.
To remove the remaining display components, including the display brackets, antennas, cable, and enclosure, you must remove the entire display assembly from the computer. See Display assembly and components (whole
Description | Spare part number |
|
|
Display panels |
|
|
|
|
|
|
|
|
|
Display bezels |
|
|
|
For use in HP ProBook 6560b models with a webcam (bezel includes | |
|
|
For use in HP ProBook 6560b models without a webcam (bezel includes | |
|
|
For use in HP EliteBook 8560p models with a webcam | |
|
|
For use in HP EliteBook 8560p models without a webcam | |
|
|
Webcam module |
|
|
|
HP ProBook 6560b models | |
|
|
HP EliteBook 8560p models | |
|
|
Microphone module |
|
|
|
HP ProBook 6560b models | |
|
|
HP EliteBook 8560p models (includes keyboard light) | |
|
|
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 58).
Component replacement procedures 59
